ABS Desiccant Dryer PC Drying Machine Pet Dehumidifying Industrial Dehumidifier
|FOB Price:||US $1 / Piece|
|Min. Order:||1 Piece|
|Min. Order||FOB Price|
|1 Piece||US $1/ Piece|
|Transport Package:||Wooden Case|
- Certification: ISO9001:2008, GMP, Ce, QS, UL, SGS
- Dehumidification Capacity: >40Kg/H
- Suitable Temperature: 5-38 Degrees Celsius
- Type: Honey Comb
- Hopper Qty: None
- Plastic Type: ABS
- Automation: Automation
- Trademark: XINGKE
- Fan: With Fan
- Control: Automatic
- Structure: Integral
- Material: SUS#304
- Material Processed: Plastic Flakes
- Screw: None
- Computerized: Computerized
- Origin: China
♦ Adopts P.I.D. temperature controller to accurately control regenerative temperature
♦ The dehumidifying system of the series feature two coolers to ensure a low return air temperature and low dew-point
♦ Return air filter is mounted inside to ensure no contamination t the honeycomb.
♦ Full molecular sieve, providing better honeycomb dehumidification than silica gel application.
♦ Centralized automatic control can be realized by optionally selected PLC touch screen controller.
♦ Optionally select dew-point monitor to realize dew-point real - time monitoring.
♦ Optionally select drying heater and its temp.controller to work with drying hopper for material dehumidifying
♦ Optional heat-resistant air pipe,cyclone dust separator with floor stand,oil filter are available.
♦ Dew-point temperature at -50ºC can be set.
The main body of honeycomb rotor is formed by ceramic honeycomb which is made from ceramic fiber
and organic addictive. Molecular sieve and silicone as basic material are crystallized and sintered at high
temperature for hard surface and tightly attached to the internal wall of honeycomb. Therefore,
it would not generate silt as barrel packaged or turntable molecular sieve to contaminate the plastic.
The honeycomb rotor can be used permanently and can be washed, while the ordinary molecular sieve
must be usually replaced for its easily getting saturate and aging. The water of moisture return air will
be quickly absorbed by molecular sieve when it across innumerable ostioles of the honeycomb rotor,
Therefore ,the air is completely dehumidified and reaches a very low dew-point. Regenerating and dehumidifying happen simultaneously and follow the similar principle, except that their regeneration air flows in the opposite direction.
Dehumidification and drying: The hot and humid air from drying material barrel is blown into honeycomb rotor
after cooling. The water in air is absorbed by rotor and then desorbed by the regeneration heating air. The two
airflows workon the rotor at the same time, and as the rotor rotates, the water in air can be absorbed and desorbed continuously. Thus,a stable low dew-point air is formed and then blown into the drying barrel after heated to the
drying temperature of plastic, forming a closed loop to dry material.
Material suction: material suction is to suck material from material barrel or other material container into drying
material barrel. The motor starts to run when the magnetic reed switch of the vacuum hopper detects no material,
generatingvacuum in vacuum hopper, and then the material in material barrel will be sucked into vacuum hopper
because of the pressure difference of air. The motor stops working after sucking and the material will drop into
drying barrel. At last the dried material will be sucked into SVH hopper or other hopper which is set in plastic
DRYING CAPACITY SPECIFICATION
XINGKE has two major production in abroad and China, with a lot of agents , representative offices and four branch in over the world ,set up the leading visualize in molding manufacturing processing.
WHY US ?
* More than 30 years experience in plastic moulding & extrusion industry;
* CE,ROTH,ISO etc. certification exams passed.
* Professional sales team for overseas markets;
* High efficiency, High communicate
* Raw Materials Processing System
* Centralized Drying Dehumidifying System
* One-Stop Solution
* "Euro" Slow-Speed Granulators
* Gravimetric Blenders
* "Euro" Hopper Dryers
* All In One Dehumidifier Dryers
* Honeycomb Dehumidifiers
* Oil Heaters
* Water Cooled Chillers
1) Are you manufacturers or trading company ?
X: Manufacturer.We produce machines in China factory and developing products from South Korea for best technical resourses , It can realize to advanced technology and reasonable cost for clients.
2) Do you have CE,EU,ISO9001 etc. certification ?
X:Yes , All of our products approved with these certifications.
3) Do you have any experience in new IMM fatory planning ?
X:Yes, also we can offer you one - stop solution (liquid water ,eletric,vacuum ) for your IMM or extrusion facory.